Brakes - Fitting Discs and Required Ancillaries

What you actually need for the disc/drum conversion is pretty straightforward. Disconnect the steering arms, top and bottom swivel-pins, CV joint, and flexible brake pipes at the subframe - that’s it. There are, however, a number of ancillaries to consider.

Basics

Basics Fitting discs designed for the Mini is easy enough. Just make sure you use CV gaiters for the disc-brake set-up - these have a different bellows shape to stop the gaiter rubbing the inside of the hub. The drum type will rub, then split, shedding grease all over the place. Moly grease is mighty mucky stuff to deal with and doesn't assist braking at all! A tip for racers - to stop the gaiters over-expanding when getting very hot and imitating the aforementioned, put either a decent sized split pin or (my favorite) a piece of very small bore pipe - as in the type supplied with WD40 aerosols, etc. - under the retaining strap on the drive shaft. This allows air to escape and return,

Lubrication - Oil, what it does and how

It's criminal. Folk spend fortunes putting together super-sonic motors, only to skimp on the oil they use. Why? Oil's oil right? Wrong. Even if it's a standard engine, it deserves TLC considering it's extremely hostile working environment.

Oil is literally the engine's life-blood. The opening few sentences are astonishingly true. Oil isn't there just to prevent all metal components within an engine fusing together in the first few seconds of running, creating a total melt down of Chernobyl proportions. It's an intricate blending of chemicals to protect the engine as a whole.

The most commonly uttered statement about engine wear is most wear occurs within the first 10 minutes from start up when cold. True if cheap chip fat oil is used.In performance and race engines, a considerable amount of wear is created by heat, load, speed, and pressure. Again, cheapy oil won't give protection here.

Lubrication - Temperature critical

The correct running temperature of the oil is perhaps even more important than the water/coolant temperatures - so let us consider how to control them.

Mainly because it seems to be the most misunderstood of the whole process, and oil cooler fitment almost a reflex when over-heating occurs where a tuned engine of any type is concerned. And in many cases on standard production road cars for that matter.

Almost since the appearance of the immortal Cooper S, fitting an oil cooler has been the essential thing to do to any tuned Mini without any comprehension why. The original fitment was necessary because oil and bearing technology wasn't too advanced. Asking an oil of yester-year to cope with lubricating an engine at racing speeds, and a gearbox pushed their performance to the edge of their all too narrow capability, so extreme control over their working environment was essential for reliability. Hence oil cooler fitment.

Historical Article - March 1992 - Wild Thing!

In 1988, a humble 1973 Mini 1000 was minding its own business somewhere in London, when along came a young Mini freak called Jason King, who wanted to change it for ever, and make it famous.

Jason persuaded the owner to take £450 for the car, and then proceeded to throw £12,000 worth of presents at it for the next 3 years. Every minute of Jason’s spare time was spent working on his new car and every minute of his working time was spent looking for spares.